I wasn’t very good at modelling buildings before and found it very difficult, but in the beginning I chose to make a low poly structure first so that the whole big shape would be made first, and then the refinement would be very easy after making the big structure first.

And for the most important building on behalf of the gate symbol of the gold decoration above this is more difficult, because he is a each one of the gold bars put together the structure, so I first use a small square, it will be elongated to the appropriate shape and the apex of the smooth stone of the whole want to streamline, rather than like low poly model put together, the whole gold decoration is divided into several structures divided into front and back levels, and Access to the roof, but because of the overall structural problems, some places can not be hidden, so I make small changes.

The gold decorations above the roof are made to fit the whole roof by plane and adjusting the angle to the angle of the roof. But because of the structure of the problem, these decorations look very rough although so, but in the final product will not be seen, so the back will not be additional processing, just some refinement.

In the subsequent modelling production, I made the gate in accordance with the original design of the original look, but also made the relevant chandelier, but because of the chandelier size and layout of the reason, the effect is not so good, will block the back of some of the structure, so the results for the appropriate simplification of the latter.

At the same time, I also did a little light test also carried out a colour test, found that the light has a lot of places are not found, can be appropriate to simplify the details, all the details are concentrated in the place where people can pay attention to at a glance.

In the back of the vision test, I gave the model on his original colour, and found that the effect can meet the final product, and then at the same time I did some lighting tests, plus the gold part, and found that the gold part of the slightly more, there is a little bit of impact on the composition, and at the same time some of the lights on top of the building will also be the longest impact on the composition of the attention is the first time not to focus on the chandelier and the place of the illumination.

However, I found that the whole building had a lot less detail and the wall next to it would expose the structure of the building behind it under the influence of the building, making the whole figure would be an empty section and look very strange and not in line with realistic architectural standards, so I reduced a lot of detail on the two walls next to it into a striped wall, and added a curved structure under the two columns in the middle, imitating the structure of some traditional sculptures that would be placed at the entrance of a building, and some stripes pulled out of the roof mimic the tiles on top of traditional buildings by using a metal structure.

However, the most important influence on the door is the light, because the light will affect the final picture when the door looks like, so I added a few materials on top of the light, so that it can affect the surrounding scene, first of all, I did a colour test and finally found that the yellow is more in line with the traditional culture of the inside of the light, and some Chinese buildings in the modern night will be installed by the designers of the green light, because their The roofs are usually green and the green lights show the original colours and the whole effect is better, although sometimes it is too bright, but it combines well with the city lights.

Meanwhile in testing, I added the light strips that had appeared in the design drawings, these blue light strips help with the convergence of lines of sight, while I tweak their brightness a bit more so that they don’t dominate the scene as much, and in the end, this effect inside the rendering is more in line with my awards, but not as much as it could have been.

Because the teacher suggested that the back of the building could be added a space with depth, so that the whole space of the gate extends backward and is not directly interrupted in the gate, so I made a trapezoidal structure, so that the whole line of sight to the inside is part of the extension, and in the inside of the simple decorative and architectural structure.